Select your language

THEIR PAIN – YOUR OPPORTUNITY Lessons Learned from an FDA Warning Letter

A Compliance Short Cut

FDA warning letters are an important resource for identifying areas of focus for
FDA inspectors and the agency’s expectations post inspection.


THE INSPECTION YOU DON’T WANT TO EXPERIENCE - LESSONS TO LEARN


A small multispecies feed mill in Missouri recently received a letter from the
FDA after failing to satisfactorily address issues that came up in an inspection
that took place from April through May, 2023. This time the focus will be on
issues relating to the Hazard Analysis and Risk-Based Preventive Controls
(HARPC) requirements and Current Good Manufacturing Practices. Next time,
we’ll examine the violations regarding the Veterinary Feed Directive and
Medication use and handling.


HARPC


The Feed Mill did not have a hazard analysis, written food safety plan or
designated PCQI (Preventive Controls Qualified Individual). Given that all of the
compliance deadlines have passed, the expectation is that feed mills and
others covered by this regulation will have conducted an analysis relating to
the hazards of their feed ingredients and processes. This analysis must be
performed under the guidance of a PCQI and is the cornerstone of the food
safety plan.


Note: The Hazard analysis and food safety plan must be reviewed at least every
three years by a PCQI and signed by the owner or top manager at the firm.


CGMPs


The feed mill failed to evaluate corn, dried distillers grain, oats and soybean
meal for the presence of mycotoxins. Specific mycotoxins noted included:
aflatoxin, fumonison, and deoxynivalenol (DON/vomitoxin).
The mill did not implement flushing or sequencing practices to prevent
decontamination of animal feed. There were two problems noted. One was the
failure to flush the mixer between a batch of cattle feed with copper and a
batch of sheep feed. The second was the use of an unlabeled premix in a horse
feed that was followed by a batch of sheep feed. The firm had no idea what
ingredients in the premix were carrying over into sheep feed.
The feed mill had pest control issues noted around areas where medications
and medicated feed are stored.


KEY TAKEAWAYS
• Make sure your Food Safety Plan is up to date.
• Maintain your focus on the key hazards of Mycotoxins, Medications, Nutrient
Toxicity or Deficiency and Physical Hazards (foreign objects). The inspection
is evidence that FDA continues to focus on this area.
• Document, Document and Document!


ABOUT THE CONTRIBUTING ADVISOR


Rich Galutia is FEED MARKETING’s Senior Regulatory Compliance Advisor. Rich
owns OSH Solutions (www.oshsolutions.com) - focused on Food Safety, OSHA
& DOT compliance. Please feel free to contact Rich to support your regulatory
compliance needs. Rich can help get the clarity you need about safety
regulations so you can focus on growing your business.

Image